A large amount of information on one site.
MANUALS-FREE
Manuals-free » Komatsu » BULLDOZER - LARGE(D80-) » D275A-5D S/N 25001-UP (-50cent. Spec.) [d275a-3c] » WORK EQUIPMENT [|330000] » 190. RIPPER BEAM AND ARM (FOR GIANT RIPPER) (WITH PUSHER BLOCK) (COLD WEATHER (B) SPEC.)(#25001-30000) [T2400-01A2] - Komatsu part D275A-5D S/N 25001-UP (-50cent. Spec.) [d275a-3c]

190. RIPPER BEAM AND ARM (FOR GIANT RIPPER) (WITH PUSHER BLOCK) (COLD WEATHER (B) SPEC.)(#25001-30000) [T2400-01A2] - Komatsu part D275A-5D S/N 25001-UP (-50cent. Spec.) [d275a-3c]

d275a-3c / T2400-01A2
D275A-3C 00000702 IPPER BEAM AND ARM (FOR GIANT RIPPER) (WITH PUSHER BLOCK) (COLD WEATHER (B) SPEC.)(#25001-30000)
_ _  №  Number Qty Name Options
    1 17M-79-41150 1 BEAM SN: 25001-@
    2 175-78-61271 2 BUSHING SN: 25001-@
    3 17M-78-41170 4 PIN SN: 25001-@
    4 07020-00000 4 FITTING,GREASE SN: 25001-@
    5 205-70-61560 4 PLATE SN: 25001-@
    6 01010-62040 8 BOLT SN: 25001-@
    7 01643-32060 8 WASHER SN: 25001-@
    8 175-78-61281 4 SEAL SN: 25001-@
    9 17M-79-11120 1 PIN SN: 25001-@
    10 175-79-61160 2 PLATE SN: 25001-@
    11 01010-81030 4 BOLT SN: 25001-@
    12 01643-51032 4 WASHER SN: 25001-@
    13 195-79-52110 2 COLLAR SN: 25001-@
    14 195-79-52130 1 PIN SN: 25001-@
    15 04050-16040 1 PIN,COTTER SN: 25001-@
    16 17M-78-21210 1 ARM SN: 25001-@
    17 175-78-61271 2 BUSHING SN: 25001-@
    18 175-78-61281 4 SEAL,DUST SN: 25001-@
    19 17M-78-11150 2 PIN SN: 25001-@
    20 205-70-61560 2 PLATE SN: 25001-@
    21 01010-62040 4 BOLT SN: 25001-@
    22 01643-32060 4 WASHER SN: 25001-@
    23 ~09601-60000 1 PLATE, NAME,NAME SN: 25001-25373
    24 04418-13060 4 SCREW SN: 25001-25373
    25 195-79-31141 1 SHANK SN: 25001-@
    26 09244-02508 1 PIN SN: 25001-@
    27 195-78-21580 1 PROTECTOR SN: 25001-@
    28 09244-02508 2 PIN SN: 25001-@
    29 195-78-21331 1 POINT SN: 25001-@
    30 17M-78-21360 1 SHANK,(LIMITED SUPPLY) SN: 25001-@